Begin by setting aside those two trimmer pots and obtain 2 more of the fixed 50 ohm resistors.
Put one of those at the input of the pre amplifier (#2) between ground and input right next to the green trimmer cap.
Put another at the input of the PA (#3) between ground and input.
The third 50 ohm resistor can be placed at the input of module #1 if there is any instability between module #1 and the oscillator/exciter below it, otherwise it could be set aside as a spare.
Peace!
K-ROCKS RadioOne
ZeroPointRadio
AM Stereo 1670
FM Stereo 92.1
Post by sgtpeppers on Mar 25, 2012 22:19:07 GMT -6
I had those clamps on my jpole, worked great until the wind picked up. now i'm using 3 u-bolts and a new antenna. You can pick them up at any hardware store or automotive parts store. they're dirt cheap