Can somebody please help? I need to drop the low power setting on my CZE-15A to under 1 watt to use my new 45 watt linear. Some models of the CZE-15A online are different than mine but have same model number. The only adjustment is near the final RD15HVP1.. Some have “rf power” controls on the "pcb". Not mine. I used a 120 volt variac temporarily to test on the 25amp adjustable supply to bring the power down to 1 watt output from transmitter. Please note i DID NOT connect the 45 watt linear during the variac test and CZE-15A was on a dummy load. There’s gotta be a better solution. Craig