FM Broadcast Transmitter Specs - HLLY Model: 1 ~ 20 Watt

[HighMountainRadio]

HLLY - Model 1 ~ 20 Watt

Frequency Range:   88 ~ 108 MHz
Frequency Step Value:   100 KHz, 10 KHz or Custom (50 KHz)
Modulation:   FM (15%) (peak deviation +/- 75%)
Frequency Stability:   < +/- 100 Hz
Frequency Stabilization:   PLL Frequency Synthesizer (Phase Locked Loop)
RF Power Output:   1 or 20 Watts +/- 0.5 db
Harmonic Suppression:   < -65 dbc
RF Output Impedance:   50 Ohms (Unbalanced)
RF Output Connector:   'N' Type Female   
Audio Input Connector:   3.5mm and RCA Type (Also 3.5mm Microphone Jack with front panel adjustable gain control knob)
Pre-Emphasis:   50us or 75us (User Selectable)   
S/N Ratio:   Mono >70 db (20 ~ 20,000 Hz)
S/N Ratio:   Stereo >Stereo 65 db (20 ~ 15,000 Hz)

Stereo Separation:   -50 db
Audio Frequency Response:   80 ~ 15,000 Hz
Audio Distortion:   <0.5%
Input Level:   -15 dbv
Low Pass Filter:   N/A
Power Requirements:   220 or 120 VAC, 60 Hz
Operating Temperature:   -20 ~ 45 Degrees Celsius
Duty Cycle:   Continuous Duty

WEBSITE:   www.hllyradio.com


***NOTE !! READ HERE !! VERY Important Regarding HLLY Model 1-20 Watts - Just an FYI

www.radiobrandy.com/Hobby-Broadcasting.html

It should also be noted that I do not own any HLLY transmitter and have not had the opportunity to evaluate one. This is one observers comments, from Radio Brandy, so for what it may be worth, duly noted..


Spooky...
  

Attachments: